HELICAL PILES

The helical pile we furnish is a round tubular steel shaft with helices welded on it. A steel plate is pressed to form the twisted shaped helix. We supply three different shaft diameters: 2.875", 3.5" & 4.5". Helices come in five different diameters: 8”, 10”, 12”, 14” & 16”. Usually, three helices with increasing diameters are mounted on the starter section, which is followed by extensions as needed.


We furnish matching couplings to connect shaft sections and shaft termination brackets. The standard length of a shaft section is 10’-6”; however, we can furnish other sizes to accommodate accessibility concerns. We supply hot-dip galvanized as we as have steel piles. 



2.875" SHAFT

3.5" SHAFT

4.5" SHAFT

The helical pile we furnish is a round tubular steel shaft with helices welded on it. A steel plate is pressed to form the twisted shaped helix. We supply three different shaft diameters: 2.875", 3.5" & 4.5". Helices come in five different diameters: 8”, 10”, 12”, 14” & 16”. Usually, three helices with increasing diameters are mounted on the starter section, which is followed by extensions as needed.

We furnish matching couplings to connect shaft sections and shaft termination brackets. The standard length of a shaft section is 10’-6”; however, we can furnish other sizes to accommodate accessibility concerns. We supply hot-dip galvanized as we as have steel piles. 


2.875" SHAFT

3.5" SHAFT

4.5" SHAFT

Less

HOME PAGE

ABOUT US

- ABOUT


PRODUCTS

- HELICAL PILES

- EQUIPMENT


DISTRIBUTOR & INSTALLER

- DISTRIBUTOR

- INSTALLER

PORTFOLIO

- REFERENCED PROJECTS

  

 CONTACT US

 38-22B Crescent Street 

LIC, NY 11101

internationalgeo@gmail.com

718-726-0707